KRONOCOR 410m
Finish alkyd matte enamel
Description
KRONOCOR 410m is a finishing alkyd matt enamel. The advantages of the product include quick drying, ease of application and color retention. In addition, the enamel has high light resistance and resistance to atmospheric influences. KRONOCOR 410m is used as a finishing enamel for agricultural machinery, earthmoving equipment and cranes, as well as for frames and products of light and heavy engineering.
Preparation for coating
The enamel must be mixed well before use. The primer or soil should be covered with finishing enamel strictly following the terms specified in the product data sheets.
Application conditions:
• The product must be applied at a temperature of +10°C to +35°C and a relative humidity not exceeding 80%.
• The surface temperature must be at least 3°C above the dew point.
• Temperatures below +10°C slow down the drying process.
Brushing is recommended for painting edges and small areas. Roller application should be used on small areas and surfaces. In both cases, make sure that the required amount of material is applied. When it comes to a fast-drying product for industrial use, roller or brush application cannot guarantee the correct appearance as it may cause unevenness or insufficient stretching.
It is also worth considering that drying times may vary depending on the thickness of the coating and the relative humidity. Good ventilation of the surface facilitates the drying process.
Stacking times depend on the thickness of the coating, the relative humidity and the size of the products.
Recommendations for use
• Used containers must be disposed of in accordance with national and/or regional regulations.
• After finishing painting work, it is recommended to immediately rinse all equipment with a special cleaning solvent.
• The product remains stable at temperatures between +5°C and +30°C for 12 months.
• The product should be stored in a closed, dry place, away from heat sources.
Characteristics
Delivery characteristics of the KRONOCOR 410m converter
| Viscosity (DIN8 at 20°C), sec | 30±5 |
| Specific gravity(at 20°C), g/l | 1200±20 |
| Dry residue by weight, % | 63±2 |
| Dry residue by volume % | 52±2 |
Characteristics of color derivatives KRONOCOR 410m
| Viscosity (DIN8 at 20°C), sec | 20-40 |
| Specific gravity(at 20°C), g/l | 1100-1300 |
| Dry residue A+B by weight, % | 60-66 |
| Dry residue A+B by volume, % | 48-54 |
| Volatile organic compounds,% |
depends on the color Available in SDS (paragraph 15) |
| Available colors | Color Passion |
| Gloss (60°) | 10-20 |
