KRONOCOR 410s
Finish alkyd semi-glossy enamel
Description
KRONOCOR 410s is a semi-gloss alkyd topcoat. The product features include fast drying, ease of application and color retention. The enamel has high lightfastness and weather resistance. KRONOCOR 410s is used as a topcoat for agricultural machinery, earthmoving equipment and cranes, as well as for frames and products of light and heavy engineering.
Preparation for coating
The product should be mixed well before use. The primer or soil should be covered with the topcoat strictly following the deadlines specified in the product data sheets.
Application conditions:
• The product should be applied at a temperature of +10°C to +35°C and a relative humidity not exceeding 80%.
• The surface temperature should be at least 3°C above the dew point.
• Temperatures below +10°C slow down the drying process.
Brushing is recommended for painting edges and small areas. Rollers should be used on small areas and surfaces. In both cases, make sure that the required amount of material is applied. When it comes to a fast-drying product for industrial use, roller or brush application cannot guarantee the desired appearance.
Drying times may vary depending on the thickness of the coating and the relative humidity. Good ventilation of the product surface facilitates drying. Stacking times depend on the thickness of the coating, the relative humidity and the size of the products.
Recommendations for use
• Used containers must be disposed of in accordance with national and/or regional regulations.
• After finishing painting work, it is recommended to immediately rinse all equipment with a special cleaning solvent.
• The product is stable at temperatures between +5°C and +30°C for 12 months.
• The product should be stored in a closed, dry place, away from heat sources.
Characteristics
Delivery characteristics of the KRONOCOR 410s converter
| Viscosity (DIN8 at 20°C), sec | 30±5 |
| Specific gravity(at 20°C), g/l | 1180±20 |
| Dry residue by weight, % | 62±2 |
| Dry residue by volume % | 50±2 |
Characteristics of color derivatives KRONOCOR 410s
| Viscosity (DIN8 at 20°C), sec | 20-40 |
| Specific gravity(at 20°C), g/l | 1100-1300 |
| Dry residue A+B by weight, % | 60-66 |
| Dry residue A+B by volume, % | 48-54 |
| Volatile organic compounds,% |
depends on the color Available in SDS (paragraph 15) |
| Available colors | Color Passion |
| Gloss (60°) | 40-60 |
